Slippy outsole on winter shoes: what to do


Every new winter we buy new attractive shoes and face the same problem: shoes slip. What to do? Of course, the grooved sole will not cause problems, but often the shoes we buy are not chosen for the quality of the sole, which would ideally stand in the snow, but in appearance. So slippery sole. What to do?

You can still when buying a regular pair of fashionable shoes to pay attention to the material from which the sole is made. It must be a thermoplastic elastomer. You can also consider the option of polyurethane soles, but it slips on the snow much more than the first material, especially if there are heavy frosts on the street.

If the choice fell on the most beautiful boots in the shop window and, unfortunately, the sole is not from a thermoplastic elastomer, but a very smooth one, then the surest option is to take the shoes for repairs, where you will be happy to make rubber prophylaxis for little money. It is reliable, aesthetically pleasing (no one will notice that something is wrong on your foot), plus it will be for a long time, because thanks to rubber prevention, boots will last far more than one season.

Suppose this option does not suit you either. The boots are still slipping. What to do? There are several reliable "home" options to solve this problem and forget forever that there is a slippery sole, what to do about it and where to go.

1) At any hardware store, you can now find epoxy glue, which includes resin that is beginning to harden at the moment when both components are mixed in a tube. The result is something that remotely resembles plastic. Before you apply the composition on the sole, it must be degreased. Glue is mixed and quickly spread on the sole, after which it should be sprinkled with a layer of sand. Of course, it all depends on the material from which the sole is made: the closer its material is close to the composition of the glue, the better it will hold.

2) The same manipulations as in the first paragraph can be carried out with ordinary Moment glue.

3) An option in which you do not need to get dirty with glue: stick an ordinary adhesive plaster on the sole. Best of all will suit the fabric, the one that is sold in a store in a wide white roll. The effect of adhesion of the sole to the road will be the stronger, the rougher the patch fabric. A small minus of the option is its high cost, because adhesive plasters will need to be changed every 2-3 days, since they will not linger on the sole for a long time.

4) In the same stores are sold anti-slippers. Outwardly, they resemble rubber clamps on the sole with built-in screws, one rubber band is in the circle of the sole, and the other with spikes - across. But here you need advice from sellers, which particular anti-slippers will fit your boots, as they come in several forms. Some will fly off their feet, and with others it will be possible even to gallop along the skating rink.

Well, are you already trying to wear anti-slippers on new shoes? In my head, the problem “Slippery sole. What to do?". Is it spinning? Then we continue.

5) In specialized stores you can find traces that are made of polyurethane and have small spikes. Shoes are worn with the help of thin bandages. The disadvantage of this option is the fact that the shoes are quite loudly clicking in the premises.

6) On the contour of the sole, you can cut a sticker from an old felt boot and glue it with superglue.

Remember, in winter, at pedestrian crossings, and not only, it is very dangerous to walk in shoes with a smooth sole. Ice, rolled snow - danger lurks everywhere. You can no longer think about how slippery the sole, what to do with it, and so on. You can use the tips from this article, or initially buy shoes with knurled soles.

5 posts

1. How to choose non-slippery shoes?
- The most important element of the shoe, which is responsible for its adhesion to the surface is the sole. Therefore, when choosing shoes, first of all we pay attention to the sole, because it will depend on it whether our shoes are not slippery.
The main criteria when choosing a sole are: protectors and the material from which the sole is made.
The main function of the tread sole is to protect the very base of the sole from moisture, cold and mechanical damage. And also, as it is known, protectors perfectly protect shoes from slipping.
Pay attention to the height of the tread and the shape of its elements, which should be varied, from triangles to circles. For winter, the tread height should be greater than for other seasons.
Below I will give a classification of the material of the sole, from the slippery material to the non-slippery.
Leather sole - the most slippery material.
Hard rubber is a slippery material.
Thermal rubber is moderately slippery.
Polyurethane - almost never slip.
Thermopolyurethane - do not slip.

But, if you are not an expert and do not understand the materials of the sole, then it is not scary. You can determine whether your shoes will slide to the touch.
Try to bend the sole, if it is hard, then the shoes will be slippery. If soft and easy to bend, then this is the best choice in the direction of non-slippery shoes.

2. What can I do to keep shoes from slipping?

When buying shoes for cold weather, you must first look at the structure of its soles. Boots that have a smooth sole surface are completely unsuitable for the winter season, as it will not provide the right grip in the ice. The best option for winter shoes would be a sole with a corrugated pattern and a good tread. But if the question of choosing a new shoe is not in front of us, then you should secure the old one.

Method One: Glue

First of all, apply glue on the surface of the heel and sole, the “Moment” is best suited for this purpose. Then cut out sandpaper (preferably waterproof) or felt pieces of the required size and glue them to the sole. Also, instead of these materials it is possible to coat the glue layer with coarse sand. After drying, it will create a sandpaper effect. This method must be repeated every week, as the glue will gradually erase.

Method Two: Adhesive Plaster

For this method, you need to purchase adhesive plaster in rolls on a fabric basis. It is necessary to glue the plaster on a clean, dried and warm sole with cross-strips. This method is very simple and affordable, but not at all durable, it lasts only 2-3 days.

Method Three: Potatoes

To prevent the boots from slipping, before going out into the street, rub the sole with raw potatoes or apply a solution of starch and water on the sole with a cloth. This procedure must be done before each trip to the street in the ice.

Method Four: Anti-slip Pads

If you contact the shoe repair shops, then there you can offer professional anti-slip pads. They are cut on the cast of the sole and very tightly glued to the surface. This method looks the most aesthetic and not noticeable when walking.

There are also anti-icing pads that can be attached independently. They are sold in tourist shops.

Method Five: Drawing Picture

If the shoe has a completely smooth sole, then you can apply a pattern on it yourself. This can be done with a nail, knife or other sharp object. The most important thing in this case is not to pierce the sole, so you need to do the relief of the sole carefully.

Method Six: Screws

And the last way is the most durable. It can only be used on shoes with thick soles. First of all, buy small screws in any hardware store and screw them into the sole of your shoes. Then remove unnecessarily protruding ends of the screws. After that, the shoes will stop slipping, but they will click like heels.

How to choose a non-slip shoe sole

Shoes slip or not depends on the material of the sole and the tread pattern applied on it.

Winter shoes should have a sole made of soft material. At first glance, it is easy to check in the store, just trying to bend it. But this method is far from 100% effective. The fact is that at low temperatures, the sole may stop bending.

So if youwant to really wisely approachthe choice of shoes you have to learn fromwhat it is made of:

  • Thermoplastic elastomer (TRP) - almost completely safe when worn in the cold, it becomes slippery only if it is -45 degrees outside,
  • polyurethane (PU) is not suitable for wearing at low temperatures, it slides strongly, and at –20 degrees and below it may burst,
  • Thermopolyurethane (TPU) - does not slip, but keeps heat poorly, therefore, it is usually combined with ordinary polyurethane, making a two-layer sole,
  • polyvinyl chloride (PVC) - this material is categorically not for winter, it makes a very slippery shoe sole, and in the cold it will most likely burst,
  • ethylene vinyl acetate (EVA) is a very slippery material
  • thermoplastic rubber (TPR) - at minus temperatures it will become very slippery, the insidiousness of such shoes is that, going out during the day during the thaw, you will feel quite stable on the ice, but if it freezes in the evening, it may seem like real skates ,
  • tunit (tunit) is a composite material that combines rubber and natural leather fibers and has excellent characteristics when worn at all times of the year, except for winter - be careful, this is a slippery sole,
  • leather is the sole of expensive model shoes for winter, especially for women, it is very smooth, and it is impossible to walk in it even on snow, not so much on ice: you will immediately fall, and the moisture will most likely irreparably ruin the boots, therefore Be careful when choosing such shoes.

Attention when choosing winter shoes should also be given to the protector, since it is he who keeps you on the ice. Protector should be:

  • sufficiently relief - at least a third of a centimeter in depth,
  • soft (see materials listed above),
  • with lots of items
  • with multidirectional pattern, as shoes only with cross or diagonal stripes will slide back and forth, not sideways.

How to make the sole slip at home: 7 ways

Unfortunately, not all shoes that are sold in our stores are designed for snowy and cold winters with ice. If you bought a pair of slippery sole, what to do, you no longer need to rack your brains - as they say, everything is invented before us.

Removable or adhesive linings

They can be bought in shoe and sports shops or ordered online. Removable linings are adapted to the shoes of different types and sizes. But you won't be able to wear them with model boots. For the exit shoe is better to buy a sticky option. Such linings come in different shapes, including for women's shoes with heels. Learn what material they are made of and what is better to glue. If you are afraid to make a mistake or do it carelessly, contact a workshop.

Adhesive plaster

A coarse patch for fastening dressings, on which there is no antibacterial strip, can also act as a lining that enhances the grip. But it is better not to lay a hank of plaster out of your handbag, because on the sole it is quickly erased or disappears.

Glue andsand

Slippery sole of winter shoes will become more wearable if you chaotically smear it with shoe glue, and then sprinkle it with sand so that it sticks. True, the effect is only enough for a couple of days. And do not forget that before applying the adhesive, the sole surface must be washed, dried and preferably degreased.


There are two options for making the sole non-slip using sandpaper. First of all, you can make it anti-icing pads, that is, cut them in the shape of shoes and gently stick. Secondly, you can gently rub the sole with it, making it less smooth. Just do not damage the coating of the upper part of the shoe and do not wipe the sole to the holes.

Potato starch

What to do with slippery soles, if at home there are no linings, no glue, no sandpaper, and there is ice behind the window? Try using a potato. Before you exit, you need to rub the sole well with a slice of raw potatoes. You will feel the effect, but it will not last long.


Strips of felt, glued to the sole, also eliminates slipping. But they will have to be updated pretty quickly.

Foam rubber

You can use it on the same principle as felt - cut into strips and stick to the sole. He also worn quickly.

How to choose winter shoes so that it does not slip and what to do with a smooth sole in ice?

For our climate, ice is such a familiar phenomenon that people have already invented a lot of means by which it becomes possible to minimize the likelihood of an unwanted landing, with all the ensuing consequences. So, what do pedestrians need to do, so that the doctors in the emergency room have less work, and they themselves did not have to lie in a cast for the whole winter?

The right approach to the choice of shoes

The sole, which is not slippery in itself, is one of the most important moments for ensuring your safety when driving on the streets during ice. In order to choose the right shoes, you will need to follow the following rules:

  1. It is necessary to pay close attention to the relief of the sole. The ideal option is a tread with a uniform deep pattern, the elements of which will be directed in different directions (thus, it will be possible to ensure the maximum friction force preventing fall).
  2. When buying shoes in the store, be sure to check how much it slips. For this it will be enough to hold the sole on the smooth floor of the store. And one more thing - shoes from low-quality materials at low temperatures becomes more slippery and hard.
  3. Recently, such shoes as uggs have become very popular. Please note - they can be worn only if they are adapted to the cold winter and movement on ice.
  4. In winter, there can be no question of any smooth soles! You can learn to "balance" in such shoes, but why once again expose yourself to undue risk?
  5. The sole should be soft. The softer it is, the higher the adhesion with the frozen surface will be.
  6. Remember: in the winter the most important thing is not the look of the shoe, but its reliability. Agree, to ensure your safety on the ice is much more important than "to be in trend."
  7. The country of origin also matters. Shoes made in Russia or in the Scandinavian countries would be preferable.

Slippery sole: what to do?

  1. In the event that the purchase of new shoes is not included in your budget, you can restrict yourself to the use of removable rubber soles, equipped with steel spikes. This, of course, will not add aesthetics, but the probability of a possible fall will be minimal.
  2. It is possible to use the overlays on the soles of the "anti-ice", which are attached directly to the slippery soles.

Do not forget about the time-tested popular methods of dealing with ice. Here are some of them:

  1. Use sandpaper strips whose reverse side is adhesive. This option is quite effective (three days of safe movement over the ice is guaranteed) and does not spoil the look of the shoe as much as everyone else.
  2. Adhesive "Moment", applied to the soles of your shoes, will perfectly protect against slipping during the week. Just before you go out, you will need to rub it with a large emery cloth.
  3. To ensure the safety of movement on the street in the ice can be used old boots. To do this, they will need to be cut, and pieces of matter attached to the sole of small studs.

Possible help shoe shop

Put the soft taps of polyurethane or metal - this is the best that a shoemaker can do to ensure that your sole does not slip. Yes, and spike the soles does not hurt.

In many cases, people decide to seek help from shoemakers. And this is understandable - for a relatively small fee, they can make the soles of your shoes significantly less slippery, without disturbing its aesthetic appearance.

Correct walk in the ice

  1. You must walk slowly, carefully looking at the feet.
  2. Never hold your hands in your pockets. It will be much easier to keep balance even if both hands are busy with the load.
  3. Choose the safest route.
  4. It is best to move in small steps.

Which way is preferable

Each of these measures to ensure that the soles of your shoes become less slippery has its own advantages and disadvantages. Home remedies are inexpensive, but their effectiveness is short-lived. But the shoemaker can quite reliably improve your shoes, but he will have to pay for the work.

So it is best to combine several of the above tools on one pair of shoes. This will allow you to protect yourself when walking on ice. Удачный пример – на подошву, оснащенную металлическими набойками, можно нанести клей момент, дать высохнуть, а затем растереть его. Эффективность превзойдет все ваши ожидания.

И в заключении повторно акцентируем ваше внимание на том, что зимняя обувь в гололед в первую очередь должна отличаться своей функциональностью и надежностью, а вопрос эстетики уже отходит на второй план. Particular caution when moving on icing should be shown to pregnant women and the elderly, as the possible harm to their health from the incident has been the maximum. In the event that after all it was not possible to avoid falling, in no case do not try to fall "on your hands." The probability of fracture is very high.

Homemade ways to keep your shoes from slipping

Let's follow the path of increasing the reliability of methods. As it happens, it is necessary to remove slipping of shoes for only a couple of hours or days (for example, if you are afraid to spoil the pair, and you need to get out on ice urgently and not for long), but mostly forever.

1. With the help of adhesive plaster. Action time - 2-3 days.

The bottom line: buy in a pharmacy a roll of tissue adhesive plaster. Cut a few pieces of 3-4 cm (depending on what the parameters of your foot) and glue them in the shape of "crosswise" on a dry and clean sole. The method is suitable for dry frosty winter, during the slush patch will disappear instantly. We recommend that you always carry it with you and be ready to replace it at any time.

2. With the help of felt. Action time - 1-2 weeks.

The bottom line: first you need to get pieces of felt (for example, take the old felt boots as a basis) and glue (both Moment and regular PVA will do). Apply glue to a clean and dry sole of winter shoes, and immediately glue the felt pieces along all this perimeter and wait for it to dry completely.

Please note: this method is also suitable only for dry winters. In the period of slush this is not a good option, as the felt will quickly come off, like a plaster.

3. With glue. Action time - 1-2 weeks.

The bottom line: take super glue or traditional PVA. With it, apply a pattern on a pair of dry and clean soles. Wait until the “protective pattern” is completely dry and you can safely test it on ice. A popular modification of this method: to fix the anti-slip effect, immediately cover the fresh layer of glue with ordinary sand.

4. Using sandpaper. Action time - 2-3 weeks or up to 1-2 months.

The first option, when sandpaper will help you to hold on for 1-2 weeks on ice, is similar to the previous method: just stick felt pieces of sandpaper of maximum grit instead of felt.

The second option is slightly aggressive and radical, but more reliable if periodically applied. The bottom line is that the non-slip sole of winter footwear is formed if you rub it with fine-grained sandpaper from time to time.

5. Using socks. Action time is an eternity (or until the socks are erased).

The bottom line: the method is rather strange and even funny. You just have to wear socks not under your shoes, but on top of her. Cotton, which usually make socks, perfectly resists icing, so this design - the guarantor of your stamina on ice. Therefore, if the issues of style are secondary for you, feel free to use this life hack.

Professional ways how to make the sole of the boots not slippery

We understand that not everyone will decide on a plaster under a sole or a sock over Italian boots (what can we say about socks on top of a shoe), so now we’ll tell you about professional and aesthetically adequate ways.

1. Deepen tread.

The most non-slip outsole is always equipped with a deep tread. If it is not deep enough on your pair, then the shoe maker is able to correct this moment. Please note that this method is only suitable for models with a thick sole, thin - damaged or burst.

2. Iron heels.

This miniature detail, gently embedded in the heel, will allow you to firmly lock on any slippery surface. True, a ringing knock when walking will seldom be pleasing, but if sustainability on ice is a priority, the method will help you.

3. Metal studs and screws.

The action is similar to the previous method, but here metal parts are mounted all over the floor of the sole. It should be thick and dense, and a professional should install the studs and screws.

4. Polyurethane protection.

Polyurethane is a practical material, from which even create comfortable shoes. Applied to the sole, it reduces the level of its slip, and lasts long enough. Again, only a professional should apply it.

5. Ledostupy or ice drifts.

Fixtures that are literally sold at every corner. Their variety is so impressive that you can find samples for coarse winter men's shoes, women's models, children's and others. It looks like a construction of rubber straps and studded nozzle, located in the center. Rubber straps are attached to the heel and toe of the shoe, and a wide studded part is placed in the middle of the foot. Ice drifts are the most practical and reliable product known to us. Indeed, so that the shoes do not slip into the ice, this is the best way.